FUTURE TECH LIMITED
FUTURE SOLAR,BRIGHT ALL FUTURE
Add to Cart
The FT1500-200 SERIES LiFePO4 battery is fit for E-mobility, Energy Storage System, Defense & Security, telecom outdoor applications,renewable energy systems, and other harsh environment applications.
Lithium-Ion (Li-ion) Battery:
Li-ion batteries are widely used in laptops, smartphones, tablets, and other portable electronic devices. They use lithium cobalt oxide or other lithium-based compounds as the cathode material. Li-ion batteries offer high energy density, light weight, and a high voltage.
Lithium Polymer (Li-Po) Battery:
Li-Po batteries are a type of lithium-ion battery with a polymer electrolyte. They are commonly used in small, thin devices where form factor is crucial, such as slim smartphones and wearable devices. Li-Po batteries can be more flexible in terms of shape.
Lithium Iron Phosphate (LiFePO4) Battery:
LiFePO4 batteries are known for their safety, long cycle life, and thermal stability. They are used in applications where safety is critical, such as electric vehicles, solar energy storage, and backup power systems.
Lithium Manganese Oxide (LiMn2O4) Battery:
Also known as lithium manganese batteries, these are a type of lithium-ion battery that uses manganese dioxide as the cathode material. They offer a good balance between energy density, safety, and cost.
Lithium Nickel Cobalt Manganese Oxide (Li-NMC) Battery:
Li-NMC batteries combine nickel, cobalt, and manganese in the cathode material. They are used in various applications, including electric vehicles and grid energy storage, offering a compromise between energy density, power capability, and cost.
Lithium Nickel Cobalt Aluminum Oxide (Li-NCA) Battery:
Li-NCA batteries use a cathode material that includes nickel, cobalt, and aluminum. These batteries are commonly used in electric vehicles and provide high energy density.
Lithium Titanate (Li4Ti5O12) Battery:
Li-titanate batteries are known for their long cycle life and fast charge/discharge capabilities. They are often used in applications where high power and frequent cycling are required, such as electric buses and certain grid storage systems.
FEATURES:
High cycle life
6000 Cycles (25℃, 80% DOD) for effectively lower total of ownership cost.
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
Better storage
up to 6 months thanks to its extremely low self discharge rate and no risk of sulphation.
Quickly recharge
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lightweight
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
| MODEL | FT1500-200 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 50Ah |
| Nominal energy | 1280Wh |
| Life Cycles | 6000 Cycles (25℃, 80% DOD) |
| Recommended Charge Voltage | 29.2V |
| Recommended Charge Current | 10A |
| End Of Discharge Voltage | 22V |
| Storage Temperature | 23~95 ℉ (-5~35℃ ) |
| Module Parallel | Up to 15 units |
| Dimension (L x W x H) | 260x167x210mm
|
| Approx. Weight | 16.53 lbs (7.5 kg) |
| Charge Retention And Capacity Recovery Capability | Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90 |
